TM 5-4310-451-14
5-68. VARIABLE SPEED GOVERNOR SPRING HOUSING AND LINKAGE MAINTENANCE (Cont.).
5.
Remove setscrew (24) from lever (25).
6.
Remove key (29) and washer (28) from shaft
(26).
NOTE
Bearings will be damaged when shaft Is
removed. Both bearings must be replaced.
7.
Remove expansion plug (22), shaft (26), and
lever (25) from housing (6). Discard expansion
plug.
8.
Remove seal (27) and key (30) from shaft (26).
Discard seal.
9.
Remove and discard two bearings (23).
c. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always wear protective goggles
and gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent's flash point Is 100°F-138°F (38°C-59°C). If you become dizzy while using
cleaning solvent, Immediately get fresh air and medical help. If solvent contacts eyes,
Immediately wash your eyes and get medical aid.
1.
Clean all metal parts with dry cleaning solvent.
2.
Inspect parts for cracks, breaks, and damage.
TA705123
5-253
