TM 5-4310-451-14
5-70. VARIABLE SPEED GOVERNOR HOUSING REPAIR (Con’t).
5.
Inspect mechanical parts for nicks and burrs.
6.
Replace all damaged parts.
c. ASSEMBLY
1.
Install two tubes (51) in housing (1).
2.
Install two hoses (50) on tubes (51) with four clamps (49).
NOTE
Install bearings flush with lever assembly.
3.
If removed, lubricate bearings (48) with grease and install bearings in lever assembly (46) with numbered side
up.
4.
If removed, install pin (47) in lever assembly (46).
5.
Position lever assembly (46) in housing (1).
6.
Install one washer (45) on each side of lever assembly (46).
7.
Install pin (44), with slot up, through both washers (45) and lever assembly (46).
8.
Install retaining clip (43) with new lockwasher (42) and screw (41).
5-267
