TM 5-4310-451-14
5-70. VARIABLE SPEED GOVERNOR HOUSING REPAIR (Con’t)
19.
Lubricate Inside of lower bearing (27) with
grease and outside with lubricating oil.
20.
Insert lower bearing (27), closed side up, into
housing (1) and over shaft (28).
21.
Install lower bearing (27) on shaft (28) until it
seats on shoulder of housing (1).
22.
Apply small amount of sealing compound to
edge of new plug (26).
23.
Install plug (26), cupped side up, in housing (1).
24.
Install pin (22) in lever (25).
25.
Install lever (25) on lever (38) with washer (24) and new retaining clip (23).
26.
Install short end of connecting link (20) on lever (38) with washer (19) and new retaining clip (18).
5-270
