TM 5-4310-451-14
5-70. VARIABLE SPEED GOVERNOR HOUSING REPAIR (Con’t).
NOTE
Flat of shaft is Installed on flat In fork.
15.
Install shaft (28) in spacer (36) and position fork
(33) with finished cam surface of fork fingers
facing rear of housing (1).
16.
Place wrench (34) between housing (1) and fork
(33). Press shaft (28) until spacer (36) does not
move up or down.
17.
Seat upper bearing (29).
18.
Install screw (32), new lockwasher (31), and
washer (30) to secure upper bearing (29).
5-269
