TM 5-4310-451-14
5-70. VARIABLE SPEED GOVERNOR HOUSING REPAIR (Con’t).
37.
Install new lockwasher (3), with tab facing housing (1), and screw (4) in housing.
38.
Torque screw (4) to 20 lb.-ft. (27 Nom) and bend tang on lockwasher (3) against screw.
39.
Install new gasket (2) in housing (1).
CAUTION
Apply only a small amount of sealing compound to cap. Excess sealing compound could cause
damage to bearing.
40.
Apply a small amount of sealing compound to threads of cap (5) and install cap in housing (1).
41.
Torque cap (5) to 45 lb.-ft. (61 Nem).
42.
Install pin (21) in housing (1).
43.
Install washer (19) and new retaining clip (18) on pin (21).
FOLLOW-ON TASKS:
Install variable speed governor housing (see paragraph 5
5-273/(5-274 Blank)
