TM 5-4310-451-14
5-75.
ENGINE STARTER REPAIR (Con’t).
27.
Remove nut (57), lockwasher (58), and flatwasher (59) from ground terminal (60) on end cap (4). Discard
lockwasher.
28.
Remove three screws (61) from brush holder assembly (56) and end cap (4).
29.
Remove insulator (62) from end cap (4).
30.
Remove end cap (4) from brush holder assembly (56).
31.
Remove rubber bushing (63) and two insulating washers (64) from ground terminal (60).
TA705179
5-313
