TM 5-4310-451-14
3-7. HANDBRAKE LEVER ADJUSTMENT.
NOTE
Handbrake lever is properly adjusted when additional force is needed to move lever beyond
halfway point toward applied position.
Handbrake is applied when lever is pulled forward until even with rear of air compressor unit.
a.
Release handbrakes by pushing handbrake lever (1) 450 toward front of air compressor unit.
b.
Rotate adjustment knob (2) clockwise to tighten or counterclockwise to loosen.
c.
Check adjustment.
d.
Repeat steps a and b as necessary.
3-16
