TM 5-4310-452-14
5-4. TOP DEAD CENTER (TDC) SETTING (Con't).
NOTE
If start of fuel injection timing must
be done, do not move TDC pointer or
degree indicator.
16. Turn crankshaft (8) until TDC pointer (12) is lined up
with average mark found in step 15. No. 1 piston is
now at top dead center (TDC).
17. Position degree indicator (10) on crankshaft pulley
(11 ) so TDC pointer (12) is lined up with zero.
18. Remove TDC fixture (5) and dial indicator (3) from
No. 1 cylinder head (7).
19. Install No. 1 valve cover (see paragraph 4-12).
20. Remove TDC pointer (12) and degree indicator (10).
FOLLOW-ON TASKS:
• Install front baffle assembly (see paragraph 5-27).
• Close left and right door assemblies.
5-7
