TM 5-4310-452-14
5-6.
ENGINE BLOCK REPAIR (Con't).
6.
Install 5 plugs (9), washers (8), and plugs (7).
7.
Install expansion plug (5) in engine block (6).
8.
Install plug (3) and washer (4) in engine block (6).
9.
Install new shaft seal (1) in rear cover (2).
10. Position rear cover (2) in place on engine block (6) and install 8 bolts (48) and new lockwashers (47).
11. Install plug (42) and washer (41) in engine block (6).
12. Install 4 new cylinder oil spray nozzles (44) and preformed packings (43) in engine block (6).
13. Install camshaft (see paragraph 5-15).
14. Install sleeve bushing (37), roller bearing (38), and sleeve bushing (39) in idler gear assembly (36).
15. Install idler gear assembly (36) and alien head screw (35) in oil pump.
16. Install oil pump and drive gear (see paragraph 5-17).
17. Install oil pump suction pipe (see paragraph 5-18).
18. Position front cover (34) in place on engine block (6). Install bolts (18, 21, and 32) and washers (17, 20, and 33).
19. Install new encased plain seal (31) in front cover (34).
20. Install plug (19) in front cover (34).
21. Install new preformed packing (22), cover (23), new lockwasher (29), and bolt (28) in front cover (34).
22. Install bolts (25 and 26) and new lockwashers (24 and 27) in cover (23) and front cover (34).
5-16
