TM 5-4310-452-14
5-20. FUEL INJECTION PUMP REPLACEMENT (Con't).
4.
Install fuel lines (20 and 22) on fuel injection pump (4) with fluid passage bolts (1 and 21) and 4 washers (2 and 19).
5.
Position 4 fuel injector lines (3) in place on fuel injection pump (4) and tighten fittings.
6.
Position oil line (16) in place on fuel injection pump (4) and install fluid passage bolt (17) and 2 washers (18).
7.
Install engine stop cable (25) in pin (23) and tighten screw (24).
8.
Position engine stop cable bracket (27) and clamp (26) in place on engine block and install 2 capscrews (28).
TA505585
5-45
