TM 5-4310-452-14
5-30. RIGHT FRONT PANEL REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Front end panel assembly removed (see para-
• Three self-locking nuts
graph 4-82).
• Three self-locking screws
Tools/Test Equipment:
• Eight self tapping screws
• General mechanic's tool kit
• Electric drill
• Twist drill bit, 3/16 in.
a.
REMOVAL
1.
Remove seven screws (1) from right front panel (2). Remove right front panel from trailer,
2.
Remove 3 self-locking screws (4) and nuts (6) from filler angle (5) and storage box (7), Discard self-locking screws
and nuts.
NOTE
If right front panel is damaged and must be replaced, perform step 3. If not, go to step 4.
3.
Using electric drill and twist drill bit, remove 8 self tapping screws (9) and plate (8) from right front panel (2). Discard
rivets.
4.
Inspect fiberglass panel (3) and replace if necessary (see paragraph 5-33).
5-70
