TM 5-4310-452-14
5-31. ROOF ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
• Engine off.
• General mechanic's tool kit
• Protective cap assembly removed (see para-
graph 4-30).
Personnel Required: Two
• Left and right door assemblies removed (see
paragraph 5-28).
• Access door removed (see paragraph 5-28).
• Front end panel assembly removed (see para-
graph 4-82).
• Right front panel removed (see paragraph 5-30).
• Roof side support and doorstops removed (see
paragraph 5-34).
1.
Remove 6 screws (5) from rear wall baffle (4) and roof assembly (9).
2.
Remove 4 screws (3) from roof assembly (9) and front end panel assembly (2).
3.
Remove roof assembly (9) from trailer.
4.
Remove 2 screws (1), nuts (7), and air deflector (6) from roof assembly (9).
5.
Inspect fiberglass panel (8) and replace if necessary (see paragraph 5-33).
b. INSTALLATION
1.
Position air deflector (6) in place on roof assembly (9) and install 2 screws (1) and nuts (7).
2.
Position roof assembly (9) in place on trailer,
3.
Install 4 screws (3) in front end panel assembly (2) and roof assembly (9).
4.
Install 6 screws (5) in rear wall baffle (4) and roof assembly (9).
5-72
