CHAPTER 2
OPERATING INSTRUCTIONS
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
lubricating unit. Four lifting sockets are provided to
7. Unloading New Equipment
remove the inclosure from the lubricating unit. The
lifting rings (4) are interchangeable between the
Four lifting rings (4, fig. 5) are mounted on top of the
inclosure lifting sockets, and the lubricating unit lifting
lubricating unit inclosure (10), to provide lift attachments
sockets. Four tie-down rings (8), one at each corner of
for unloading the equipment with a power crane or a
the steel skid, are used to secure the unit to the floor or
hoist. Securely tighten the four lifting rings into the
deck of its transportation medium. Tie-down cables
lifting sockets in the V-shaped frames through the top of
attached to these rings, prevent shifting or movement in
the aluminum inclosure (10). A lift attachment plate (5)
any direction, during shipment.
located on the housing, illustrates the recommended
placement of a crane sling and lift points on the
1
Louver
5
Lifting capacity plate
8
Tie-down rings
2
Door lock
6
Heater exhaust tube
9
Door latch
3
Lifting ring socket plug
7
Hand lifting handles
10
Inclosure
4
Lifting ring
Figure 5. Unloading details.
13
