TM 5-4930-207-34
(2) Disassemble the starter assembly in
closing the main contacts located inside the sole-
numerical sequence as shown, in figure 3-2.
noid. Battery current is then directed to the motor
(3) Do not remove pole shoes (27), field coils
causing the armature to rotate. Cranking torque
is transmitted by the clutch from the starting
(29), or coil assembly unless replacement parts
motor armature to the engine flywheel ring gear.
are needed.
b. Cleaning.
3-4.
Starter
(1) Use a cloth dampened with P-D-680 to
a. Removal and Disssembly.
wipe all dust, oil, and other foreign material from
the brush plates, end frames, armature and field
(1) Remove starter assembly as
instructed
assemblies.
in TM 5-4930-207-12. Match mark the
frame (16,
(2) Use filtered compressed air to blow dust
shift lever
and dirt from the crevices of the armature and
housing (14), and drive housing (7)
to assure
field windings.
proper reassembly.
Figure 3-2. Starter assembly, disassembly and reassembly.
3-3
