Section V. HOSE REEL ASSEMBLIES
(Used an Serial Numbers 69-29737 through 69-29942)
its fullest extent, unscrew from outlet and
8-10. General
attach new hose. Rewind new hose.
The hose reel bank consists of five reels and
(2) If high pressure hose reel leaks at
hoses mounted on a common base. Four of the
swivel, proceed as follows:
hoses are used to dispense chassis, gear and
(a) Unscrew swivel assembly (1
engine oil. One hose is used for dispensing air
through 9, fig. 8-6) from hub assembly (10)
under pressure. Each hose reel is equipped
applying inward pressure on retaining nut
with a lock to prevent hoses from unreeling.
(4) so eleven balls (2) are held in place.
Note. Be sure all parts are removed from
inside hub.
a. Removal. Refer to paragraph 3-101 and
(b) Remove steel washer (6) and pack-
remove the reels.
ings (7 and 8). Replace packings (7 and 8)
making sure packings (8) are separated and
b. Disassembly. Disassemble the hose reels
followed by packings (7).
in the numerical sequence as illustrated in
(c) Replace steel washer (6) and spring
(9). Be sure all balls (2) are in place. Replace
c. Cleaning.
swivel assembly in reel.
(1) Clean all parts in an approved clean-
(3) If low pressure hose reel leaks at
ing solvent.
swivel, proceed as follows:
(2) Inspect pedestals (16) for bends,
(a) Unscrew swivel from hub (10).
cracks, or other defects. Replace if defective.
(b) Replace old swivel with a new one.
(3) Inspect all threaded surfaces for
e. Reassembly. Reassemble reels in reverse
stripped or cross threads. If beyond repair,
of disassembly.
replace.
d. Repair.
installation.
(1) To replace hose, pull out old hose to
