TM 9-4310-394-13
d.
Repair. Repair is limited to replacement of parts found defective during inspection.
e.
Installation.
(1)
Install nipple (15), street elbow (14), hose connector (13), fuel valve (12), and hose connector (11)
onto fuel tank.
(2)
Install street elbow (10) and hose adapter (9) onto fuel tank.
(3)
Position fuel injection pipe (8) between fuel injection nozzle and fuel injection pump. Position the pipe so
that the fittings line up.
(4)
Carefully hand tighten connectors (7) on fuel injection pipe (8). Finish tightening the two connectors (7)
with a wrench taking care not to strip the fittings.
(5)
Install fuel injector hose (6) and two clamps (5). Refer to Appendix F for hose manufacturing
instructions.
(6)
Install fuel filter hose (4) and two clamps (3). Refer to Appendix F for hose manufacturing instructions.
(7)
Install fuel line hose (2) and two clamps (1). Refer to Appendix F for hose manufacturing
instructions.
4-29
