TM 9-4310-394-13
4-16.
V-BELT AND SHEAVE REPAIR AND REPLACEMENT. - Continued.
c.
Inspection.
(1)
Inspect all metal parts for cracks or bends.
(2)
Check all fasteners for damaged threads.
(3)
Inspect V-Belt for cracks and frays.
d.
Repair. Repair is limited to replacement of parts found defective during inspection.
e.
Installation.
(1)
Install sheave (2) and bushing (5) onto engine shaft.
(2)
Position sheave (2) on engine so that groove in sheave aligns with groove in compressor flywheel and
face of bushing is flush with end of shaft.
(3)
Install two set screws into holes (7) and (8) and tighten both set screws to 175 lb. in.
(4)
Install V-belt (3) onto sheave (2) and onto compressor flywheel pulley.
(5)
Adjust V-belt per paragraph 4-7.
4-24
(4-25 Blank)