TM9-4310-396-13
g.
Install Mechanical Gage.
(1)
Install new gage (5, Figure 4-17).
(2)
Install bracket (4) and plain hexagon nuts (3) and tighten.
(3)
Install nonmetallic tube (2) and tighten tube nut (1).
h.
Install Electrical Gage.
(1)
Install gage (6, Figure 4-18).
(2)
Install bracket (5).
(3)
Install plain hexagon nuts (3) and tighten.
(4)
Install wires (2) to corresponding terminals (4) and remove tags.
(5)
Install and tighten plain hexagon nuts (1).
i.
Temperature Transmitter.
NOTE
Use teflon tape on pipe threads of temperature transmitter.
(1)
Install temperature transmitter (3, Figure 4-19).
(2)
Connect wire (2) and plain hexagon nut (1) on temperature transmitter (3). Tighten plain hexagon nut (1).
j.
Liquid Level Switch.
(1)
Install gasket (5, Figure 4-20).
(2)
Install liquid level switch (4).
(3)
Install tapping screws (3) and tighten.
(4)
Connect wires (2) to corresponding terminal and remove tags.
(5)
Install and tighten plain hexagon nuts (1).
k.
Install Speed Control.
NOTE
Place applicable spring to marked hole.
(1)
Install torsion spring (21) and manual control lever (20).
(2)
Install bracket (19) and cap screws (16) and tighten.
4-59
