TM9-4310-396-13
k.
Install Speed Control . - continued
(3)
Install helical extension springs (17 & 18).
(4)
Install extension spring (14) on bracket (15).
(5)
Install cylinder assembly (4) (para. 4-29, e.)
(6)
Install nonmetallic tube (13) to cylinder assembly (4).
I.
Install Knob.
(1)
Install cable assembly (11, Figure 4-21) through frame control panel (12).
(2)
Install plain hexagon nut (10) over cable (9) length and tighten.
(3)
Install cap screw (7), cable bracket (3), and bracket (8).
(4)
Install cable (9) through bracket (8) and tighten cap screw (7).
(5)
Install cable (9) through manual control lever (20).
(6)
Install cable stop (5) and tighten set screw.
(7)
Tighten cap screw (6).
NOTE
Insure mark is in correct previous position on cylinder assembly.
(8)
Install cylinder assembly (4) to cable bracket (3).
(9)
Install cap screw (2), plain hexagon nut (1) and tighten.
4-60
