TM9-4310-396-13
CAUTION
DO NOT overfill. Engine will consume too much oil and oil temperature will
become dangerously high. When checking oil level, make sure engine is stopped
and sitting level. If it is tilted, you may add either too much or too little oil. If
you do not add enough oil, engine could seize up. When checking oil, simply dip
rod-cap level gage into engine block. Do not screw in rod-cap level gage.
2-6.6 Handling the Compressor Oil System. Change oil per L094310-396-12.
2-6.7 Starting the Engine by Electric Starting.
WARNING
Never use gasoline, paint thinner, or any volatile liquid as fuel or starting aid.
Explosions may occur. Failure to observe this warning may result in severe
personal injury or death.
a. Make sure shutoff screw cock (1, Figure 2-8) below fuel tank assembly is in the down position.
Figure 2-8. Engine Shutoff Screw Cock.
2-28
