TM9-4310-396-13
MAINTENANCE OF VENT LOUVERS
4-13. REPLACE VENT LOUVERS.
This task covers:
a. Removal c. Installation
b. Repair
INITIAL SETUP
Tools
Equipment Conditions:
General Mechanics Tool Kit
Engine stopped, para. 2-6.8
Materials/Parts
Paint, Green (Appendix E, item 12)
Rag, Wiping (Appendix E, item 3)
Vent Louvers (P/N 10-060)
a. Removal.
(1) Remove self tapping screws (2, Figure 4-2).
(2) Remove vent louvers (1).
b. Repair.
(1) Bend or re-shape vent louvers (1) so it will open and close properly.
(2) Clean with rag and repaint if required.
c. Installation.
(1) Install vent louvers (1) in top hood assembly (3).
(2) Install self tapping screws (2).
(3) Clean and repaint if required.
(4) Insure that vent louvers move freely to open and close.
4-19