TM9-4310-396-13
b. Installation.
(1) Install belt guard cage (20).
(2) Install compressor groove pulley (15).
(3) Install bearing thrust washer (14), cap screw (13), and tighten.
(4) Install friction clutch assembly (10).
(5) Install flat washer (12), cap screw (11), and tighten.
(6) Install V-belts (19).
(7) Install flat washers (8), lock washers (7), and cap screws (6).
(8) Install flat washers (5) and bolt (4) on support arm of belt guard cage (20).
(9) Adjust V-belts (para. 4-15, a.).
(10) Install metal grille (3), flat washers (2), and machine screws (1).
4-22
