TM9-4310-396-13
MAINTENANCE OF ENGINE ASSEMBLY
4-16. REPLACE ENGINE ASSEMBLY.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions:
General Mechanics Tool Kit
Engine stopped, para. 2-6.8
Storage battery disconnected, para. 4-26
Complete top hood assembly removed, para. 4-12
Complete belt guard assembly removed, para. 4-14
V-belts removed, para. 4-15
Fuel tank assembly removed, para. 4-22
Primary fuel tank removed, para. 4-21
Materials/Parts
Engine Assembly (P/N L60AEDE)
a. Removal.
(1) Loosen set screw (1, Figure 4-4) of exhaust muffler (2).
(2) Remove exhaust pipe union (3) and exhaust discharge hose (4).
(3) Disconnect wire coupling (5) from current limiter (6).
(4) Disconnect wires (7).
(5) Remove cylinder assembly (reference para. 4-29, e.).
(6) Remove cable assembly (reference para. 4-29, e.).
(7) Disconnect starter wires (reference para. 4-19).
(8) Disconnect wire and remove oil temperature transmitter (reference 4-29, c.).
WARNING
The fuels used in this compressor are highly explosive. Do not smoke or use open flame when performing
maintenance. Flames and explosion may occur resulting in severe personal injury or death.
4-26
