Preventive Maintenance checks and Services for 16MS125 - Continued

Preventive Maintenance Checks and Services for 16MS125 - Continued - TM-9-4310-397-14_99

TM-9-4310-397-14 Compressor Unit Reciprocating 10 CFM 175 PSI Diesel Engine Driven Trailer Mounted Model CUE67-6DY-TM Manual
Page Navigation
87

TM 9-4310-397-14 Table 4-1. Preventive Maintenance checks and Services for 16MS125 - Continued Location Item No. Interval Procedure Not Fully Mission Capable If: Item to Check/Service 22- CAUTION Cont Using standard commercial hex head screws in place of high tensile hex head screws to secure the oil separator cover can result in damage or failure of the equipment during operation. The original, or correct replacement, high tensile hex head screws must be used to secure the oil separator cover to meet ASME standards for pressure vessels. f. Install oil separator cover (108) and align match marks. Install eight hex head screws (110) and new lock washers (111) (item 1, section IV, chapter 4). 4-39

Privacy Statement
Press Release
Contact