TM 9-4310-397-14
4-43. PRIMING PUMP CONTROL REPLACEMENT .
This task covers:
a.
Removal
b.
Disassembly
c.
Assembly
d.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit
Roadside and control panel doors open.
Item 1, Section III, Appendix B
WARNING
Splashes and spills can cause eye injury and skin irritation. Wear face shield and approved
gloves. Immediately remove any articles of clothing or shoes that have become soaked with fuels.
This should be done in an area free from ignition sources.
a.
Removal.
(1)
Remove clamps (Figure 4-40, 1) from hoses (2) and (3).
Figure 4-40. Priming Pump Control
(2)
Pull hose (2) off of elbow adapter (4).
4-113
