TM 9-4310-397-14
4-59. FUEL LINES REPAIR AND REPLACEMENT. - Continued
(3)
Install elbow (11), tee (10), elbow (9), and elbow (8).
(4)
Connect fuel injector line to elbow (9).
(5)
Install ferrule (6), nut (5), and hose end (7).
(6)
Install hose end (3), nut (1), ferrule (2) and hose (4).
(7)
Wrap antiseize tape (item 1, section II, appendix E) on threaded end of plug (Figure 4-62, 1) and install.
(8)
Wrap antiseize tape (item 1, section II, appendix E) on threaded end of tee (14), and elbow (13).
(9)
Install tee (14), elbow (13), ferrule (12), nut (11), hose end (10), and hose (9).
(10)
Wrap antiseize tape (item 1, section II, appendix E) on threaded end of elbow (8).
(11)
Install elbow (8), ferrule (6), nut (5), hose end (7), clamp (3), hose (4), and clamp (2).
(12)
Wrap antiseize tape (item 1, section II, appendix E) on threaded end of elbow (29), bushing (30), tee (31),
and connector (25).
(13)
Install tee (31), bushing (30), elbow (29), ferrule (27), nut (26), and vent tube (28).
(14)
Install connector (25), ferrule (23), nut (22), and hose end (24).
(15)
Install hose (21), hose end (17), nut (15), and ferrule (16).
(16)
Install clamp (20), hex head bolt (19), and new lock nut (18) (item 3, appendix H).
(17)
Install rear panels per paragraph 4-31, d, (2).
(18)
Connect battery cables to batteries per paragraph 4-49.
4-156
