TM 9-4310-397-14b.Repair. Repair is limited to replacement of component parts.c.Installation.(1)Wrap antiseize tape (item 1, section II, appendix E) on threaded ends of fuel gauge (Figure 4-65, 2).(2)Install fuel gauge (2), and cap (1).(3)Wrap antiseize tape (item 1, section I, appendix E) on threaded end of plug (Figure 4-64, 1) and install.(4)Install fuel tank (8), six hex head bolts (4), flat washers (7), new lock washers (6) (item 4, appendix H), andnuts (5).(5)Install two pan head screws and new lock nuts (2) (item 3, appendix H).(6)Install rear panel per paragraph 4-31, d, (2).(7)Add fuel as required to tank (8).(8)Connect battery cables to batteries per paragraph 4-49.4-159
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
