TM 9-4310-397-14
b.
Testing.
(1)
Test in hot water to 180° F (82° C) for the thermostat to open and close.
(2)
If thermostat does not operate correctly, replace with a new one.
c.
Installation.
(1)
Install thermostat (6) into housing (7).
(2)
Install new gasket (5) (item 73, appendix H), cover (4), and two hex head screws (3). Torque to 20 ft-lb (27
Nm).
(3)
Slide clamp (2) over hose (1) and fit onto cover and tighten clamp.
(4)
Refill coolant per paragraph 4-6, e.
(5)
Close curbside doors.
4-181
