TM 9-4310-397-14
4-71. EXHAUST MANIFOLD REPLACEMENT .
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit
Curbside doors open.
Item 1, Section III, Appendix B
Muffler tube disconnected. (See para 4-30.)
a.
Removal.
(1)
Remove four hex head screws (Figure 4-81, 1), and flat washers (2).
Figure 4-81. Exhaust Manifold
(2)
Remove two hex nuts (3), and flat washers (2).
(3)
Remove exhaust manifold (4) and three gaskets (5). Discard gaskets.
(4)
Remove two studs (6).
b.
Installation.
(1)
Install two studs (6).
(2)
Install three new gaskets (5) (item 74, appendix H) and position manifold (4).
(3)
Install two flat washers (2) and hex nuts (3).
(4)
Install four hex head screws (1) and flat washers (2).
(5)
Reconnect muffler tube per paragraph 4-30.
(6)
Close curbside doors.
4-182
