TM 9-4310-397-14
5-3. AIR COMPRESSOR INLET HOUSING REPAIR .
This task covers:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Assembly
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit
Compressor removed. (See para 4-58.)
Item 1, Section III, Appendix B
a.
Disassembly.
(1)
Remove five cap screws (Figure 5-1, 1), one cap screw (2), six lock washers (3), and spring bracket (4).
Discard lock washers.
Figure 5-1. Air Compressor Inlet Housing
NOTE
The slotted hex nut has been installed using sealant.
(2)
Remove slotted hex nut (5), cover (6), and rod (7) as an assembly.
(3)
Remove unloader piston (8).
(4)
Remove diaphragm (9), lock nut (10), intake control piston (11), spring (12) air intake cylinder (13), gasket
(14), intake control stem (15), spring (16), and intake control valve (17). Discard gasket and lock nut.
5-2
