TM 9-4310-397-14
5-3. AIR COMPRESSOR INLET HOUSING REPAIR .-Continued
(2)
Assemble push rod (29) into body (34).
(3)
Install new preformed packing (27), (item 23, appendix H) and bushing (28) into guide (25).
(4)
Assemble new gasket (26) (item 24, appendix H), guide (25) and secure with two new lock washers (24)
(item 25, appendix H) and cap screws (23).
(5)
If removed, install pivot pin (21).
(6)
Place pivot clamp (20) over guide (25); install screw (19) and new lock nut (18) (item 26, appendix H).
(7)
Assemble intake valve (17) and spring (16).
(8)
Insert stem (15) through cylinder (13) and assemble spring (12), piston (11), and new lock nut (10) (item
27, appendix H).
(9)
Assemble new gasket (14) (item 28, appendix H) cylinder (13) and diaphragm (9).
(10)
Applying sealing compound (item 3, section II, appendix E) to threads of unloader rod (7). Assemble
unloader rod (7), unloader piston (8) and six new lock washers (3) (item 15, appendix H) and one screw (2)
and five cap screws (1).
(11)
Turn unloader rod (7) in until intake valve (17) seats. Then turn slotted nut (5) to seat against cover (6).
(12)
Install compressor per paragraph 4-58.
5-4
