TM 9-4310-397-14
5-4. AIR COMPRESSOR REPAIR.-Continued
(4)
Make certain that all accumulated foreign matter is cleaned from air passages of intake end cover (21) and
stator (51).
NOTE
Do not allow parts to remain in cleaning solvent for extended periods of time or rust spots
may form. If parts are not to be inspected immediately after cleaning, dip them in clean oil,
MIL-L-2104, or equivalent.
c.
Inspection.
(1)
Inspect for visible wear, damage, distortion, cracks, breaks, and corrosion. Replace all gaskets, preformed
packings, and seals.
(2)
Inspect threaded parts for stripped threads, cross-threading, and for nicks and burrs.
(3)
Inspect following components and replace those that are out of tolerance.
(a)
Half Coupling.
Figure 5-3. Half (Drive) Coupling
5-8
