TM 9-4310-397-14
6-9. CAMSHAFT, AND TIMING GEAR TRAIN INSPECTION. REPAIR AND REPLACEMENT.
This task covers:
a.
INSERT FUNCTION
b.
INSERT FUNCTION
c.
INSERT FUNCTION
INITIAL SETUP
Tools:
Equipment Conditions:
Automotive Maintenance and Repair
Engine removed. (See para 4-72.)
Item 2, Section III, Appendix B
Water pump removed. (See para 5-5.)
Alternator removed. (See para 6-5.)
Personnel Required:
Crankshaft pulley removed. (See para 6-10.)
Oil Pan removed. (See para 6-7.)
Two
Engine oil cooler removed. (See para 4-68.)
a.
Removal.
(1)
Remove the oil pressure regulating valve assembly by unscrewing plug (Figure 6-38, 1) and withdrawing
parts.
Figure 6-38. Oil Pressure Regulating Valve Plug
NOTE
There are two different size cap screws, note the location when removed
and replace in original holes.
(2) Remove timing gear cover cap screws and washers. Remove cover.
(3)
Remove key (Figure 6-39,1) and oil deflector (2) from crankshaft.
6-39
