TM 9-4310-397-14
CAUTION
Operating the COLD WEATHER STARTING AID when either ambient temperature is above 40°
F (5° C) or more than one time during a starting cycle will inject excessive starting fluid into
the engine and can cause equipment damage.
(e)
Pull IGNITION-START switch (4) all the way out to engage starter. Crank engine for three seconds to
check for binding, then release switch.
Figure 2-5. Unit Operation, Unusual
(f)
Pull COLD WEATHER STARTING AID (6) cable out and wait for three seconds. Push cable in.
CAUTION
Operating the engine with low or no oil pressure can cause serious equipment damage.
(g)
Depress SAFETY BYPASS switch (7) and hold. Pull IGNITION-START switch (4) and release when
engine starts. When pressure is indicated on ENGINE OIL PRESSURE gauge (8) release SAFETY
BYPASS switch (7).
(h)
If engine oil pressure does not register within three seconds after engine starts, release SAFETY BYPASS
switch (7), push IGNITION-START switch (4) in and notify supervisor.
2-33
