TM 5-4310-358-14
Section II. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
Special Tools and Equipment. There are no
Maintenance Repair Parts. Repair parts and
4-6.
4-7.
special tools or equipment required to perform
equipment
are
listed
and
illustrated
in
maintenance on the air compressor.
TM 5-4310-358-24P, Organizational, Direct Support and
General Support Maintenance Repair Parts and Special
Tools Lists.
Section III. LUBRICATION INSTRUCTIONS
Refer to Paragraph 3-2 for lubrication instruction for this
air compressor.
Section IV. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Because all required inspections must be made
includes additional services which are allocated to
daily, or more frequently, organizational maintenance
organizational maintenance.
personnel will refer to table 4-1, for procedures to be
followed during their periodic inspection.
4-9.
Preventive
Maintenance
Checks
and
Refer to table 4-1 for a listing of the
Services.
This section lists the preventive
Preventive Maintenance checks and services which are
4-8.
General.
maintenance checks and services which shall be
allocated to organizational maintenance.
performed on a monthly or quarterly basis by
organizational maintenance personnel. It includes and
NOTE
expands upon the preventive maintenance services
performed
by
operator/crew
maintenance
and
Use Tables 3-1 and 3-2 for preventive
maintenance checks and services,
then return to this Table for
expansion of checks and services.
Table 4-1. Organizational Preventive Maintenance Checks and Services
Item
Interval
Item to be
Procedures
Equipment will be Reported
No.
Q
Inspected
Not Ready (Red) if:
1
Compressor
Refer to LO
Frame Oil
4310-358-12
2
Capscrews,
Check for
screws, and
tightness
bolts
4-4