• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Chapter 3. UNIT MAINTENANCE INSTRUCTIONS - TM-5-4310-378-140041
ENGINE LUBRICATION PROCEDURE

TM-5-4310-378-14 Compressor Unit Reciprocating 5 CFM 175 PSI Gasoline Engine Driven Hand Truck Mounted Model Number Manual
Page Navigation
  21    22    23    24    25  26  27    28    29    30    31  
TM 5-4310-378-14
3-2. COMPRESSOR LUBRICATION PROCEDURE.
Perform the following procedure every 90 days or 1000 hours to
lubricate the air compressor.
NOTE
These instructions are mandatory.
Place a suitable container under the air compressor oil
a.
drain cap (1).
Remove the drain cap (1) and allow the oil to completely
b.
drain from the crankcase
Install the drain cap (1). Properly dispose the used oil.
c.
d. Remove the oil breather cap(1).
e. Fill the crankcase through the oil breather cap opening
(2) with 1-3/4 pints (0.8 Iitre) of oil (Appendix E, item 5).
f. Check that oil level is in center of sight gage (3) to ensure
that crankcase is properly filled with oil.
g. Reinstall the oil breather cap(1).
3-2 Change 3






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.