TM 3-4310-100-20 & P
(b) Remove back rest harness.
(d) Place the back rest harness between
(2) Cleaning and Inspection.
tie-in strips with raised padded portion towards the
(a) Inspect fabric for dirt, fraying, holes,
(e) Beginning with the first hole of each
tears, rips, or other indications of wear and damage
tie-in strip, lace the back rest harness to the bottom
which would render the item inadequate for use.
(b) Wash the item in warm soapy water
frame keeping an equal distance on each side of the
back rest harness.
and air-dry.
(f) Pull the cord tight and tie the ends.
(3) Installation.
(a) Cut the cotton cord into three-foot
b. Waist Strap.
lengths, and tie a plain knot on one end of each piece.
(1) Removal.
(b) Hold the back rest harness with the
(a) Unsnap the quick release buckle
raised padded portion down and facing away from you.
(c) Thread one length of the cotton.
cord into each top hole.
2-10
