TM 5-4220-233-14
4-46. SPRINGS.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP :
Tools
Materials/Parts Appendix D
Mallet, rubber
Wiping Rag (item 13)
Pliers, Needle Nose
Cleaning Solvent (item 15)
Socket Wrench Handle, 1/2" Drive
Rubber Bumpers
Socket, 5/8"
Cotter Pins
Socket, 3/4"
Socket, 7/8"
Equipment Conditions
Wrench, 3/4"
Shock Absorbers Removed
(Paragraph 4-45)
a.
Removal
WARNING
Prior to performing this task the Servicing Unit should be positioned on a
hard flat surface with the swivel jacks lowered, parking brakes set, and
chocks installed to provide a firm stable foundation. Failure to follow this
warning may result in serious injury or equipment damage.
Only replace one spring at a time. Removal of both springs will separate
axle assembly from trailer causing an unstable foundation. Failure to follow
this warning may result in serious injury or equipment damage.
Figure 4-32. Remove Springs.
4-72