TM 5-4310-227-15
models BMW-452-ENG and BMW-
4 5 2 - E N G - 1 , slide the compressor
OEG-458-ENG-2, and OEG-458-
ENG-3, or the four screws (22, fig.
away from the engine until there is
tension on the belt set. When the belt
on models BMW-452-ENG
set is properly adjusted, a deflection
and BMW-452-ENG-1.
o f three-quarters inch will result
(3) Install the belt guard (para 3-58),
from pressing down at a point mid-
models OEG-458-ENG-1, OEG-458-
way between the engine drive pulley
ENG-2,
OEG-458-ENG-3,
and
and compressor flywheel assembly.
BMW-452-ENG-1.
When the proper adjustment is reach-
e. Installation (Model OEG-458-ENG-3).
ed, tighten the four nuts (1, fig. 3-
Refer to figure 3-23, and install v-belt.
3-50
