b. Cleaning and Inspection.
3-36. Fuel Tank
(1) Clean fuel line and fitting with an
a. Removal.
approved solvent.
(1) Remove fuel line at tank end and
(2) Inspect fuel line for cracks and de-
drain into suitable container.
terioration.
(2) Remove 1/4-20 nuts and screws as
c. Repair. As a field expedient repair, in
shown in figure 3-8.
the event the fuel line becomes cut or broken,
(3) Remove strainer and cap gasket as
pressure-sensitive tape may be wound around
shown in figure A, 3-9.
the break in the fuel line.
d. Installation. Install fuel line as shown in
