TM 5-4310-276-14
d. Coat exposed polished or machined metal sur-
e. Service the engine air cleaner more frequently
faces with a suitable rustproof material after first
(figure 3-2).
removing any accumulation of rust.
2-11. Operation in Salt Water Areas
2-12. Operation at High Altitudes
a. Wipe the unit dry at frequent intervals, with
ciently at elevations up to 5,000 feet. There will be a
b. If the unit becomes encrusted with salt, wash
it with fresh water, taking care not to damage the
reduction in efficiency because of the rarified air at
this level. This is a normal condition that cannot be
electrical system with water.
prevented.
c. Make sure all surfaces requiring lubrication
are clean and dry before applying lubricant. Lubri-