TM 5-4310-276-14
2404, Equipment Inspection and Maintenance
ventive maintenance services. It should be noted that
Worksheet, in recording results of Preventive
the item number column is used as a source of item
Maintenance Checks and Services.
numbers for the TM number column on DA Form
Table 4-1. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
INTERVAL
QQUARTERLY (250 HOURS)
PROCEDURES
EQUIPMENT IS
ITEM
ITEM TO BE
CHECK FOR AND HAVE REPAIRED
NOT READY/
NO.
AVAILABLE IF:
INSPECTED
OR ADJUSTED AS NECESSARY
Q
NOTE
Perform operator/crew PMCS prior to
or in conjunction with organizational
PMCS if
a. There is a delay between the
daily operation of the equipment and
the organizational PMCS.
b. Regular operator is not as-
signed/participating.
1
Complete Unit
Clean and inspect entire unit every
250 hours or three months. Remove
dirt, grease, oil and debris. Look for
wear, loose, bent, cracked, damaged,
or missing parts. Service fuel
strainers (fig. 3-5 and 4-4) and adjust
V-belt tension (para 4-32).
Change 6
