TM 5-4310-277-14
(1) Stop the air compressor, and release all air
from the compressor by opening the draincock.
with dry compressed air and inspect for damage.
(2) Remove slowdown tube from pilot valve.
d. Installation.
Remove the sensing tube from the bottom of the
(1) Install compressor as illustrated in Figure 4-
pilot valve and disconnect plumbing and tubing
connections to the check valve.
(2) Install V-belts and belt guard. Connect
(3) Remove belt guard and V-belts.
slowdown tube, sensing tube, and check valve
connections to compressor.
(4) Remove compressor as illustrated in figure 4-
presser.
HGR5-8M-6)
a . Removal.
Change 1
