TM 5-4310-277-14
(5) Remove the compressor flywheel as
(h) Remove nuts (22), sleeves (23), branch
illustrated in figure 6-3.
tee (24), and tubes (25).
(i) Disassemble valve (28) by removing nut
(6) Refer to figure 6-4 and remove the tube
assemblies, interstage safety valve, head unloaders,
(26) and sleeve (27).
exhaust manifolds and intake and exhaust valves as
(j) Remove cylinder (29) from bracket (30).
follows:
(k) Remove nut (31), screw (32), and arm
(33).
(l) Remove the screws (34) securing the
(b) Remove aftercooler tube (4), nuts (5) and
bracket (35) to the pilot valve (36).
ferrules (6).
(m) Remove the mounting screws (37) and
remove the intake manifold (38); remove intake
(c ) Remove the unloading tube (7), nuts (8),
and bodies (9).
valve assembly (39).
(d) Remove breather tube (10), nuts (11),
(n) Remove the interstage safety valve (40)
and bodies (12).
from the intake manifold (42); remove mounting
(e) Unscrew the setscrew (13) and free the air
screws (41 ) and manifold (42).
cleaner (14).
(o) Remove the intake valve assembly (43).
(f) Remove the manifold tube (15), nut (16),
and body (17).
(g) Remove nuts (18), sleeves (19), and
(47 and 48).
branch tee (20); remove actuating tubes (21).
6-5
