TM 5-4310-277-14
from above after cylinder block has been removed.
a.1. Removal and Disassembly (Model
Remove the cylinder block (2).
HGR5-8M-6).
(3) Remove connecting rod bolts (4) and with-
(1) Perform steps (1) through (4) in a above.
draw connecting rod caps (5) from crankcase.
(2) Access to connecting rod attaching belts
(4) Disassemble the pistons and connecting
(4, fig. 6-6.1) and connecting rod cap (5) is provided
rods in the numerical sequence illustrated in figure
Change 1
