Figure 6-5. Handhole plate and gasket, exploded view.

TM 5-4310-277-14

Figure 6-5. Handhole plate and gasket, exploded view.

(8) Disconnect the connecting rods from the

(c) Remove bearings (12) and rods (13) from

crankshaft by removing the connecting rod bolt (1,

fig. 6-6) and connecting rod cap (2). The connecting

rod and connecting rod cap are matching parts. Tag

cap for identification to aid reassembly.

(9) Remove the cylinder block (5) with pistons

and connecting rods in it, from the crankcase.

(10) Pull the assembled pistons and connecting

rods from the cylinder block.

(11) Disassemble the pistons and connecting

rods as follows. Tag all parts to insure correct

reassembly.

(a) Remove retaining ring (6, fig. 6-6) and

piston pins (7) and free pistons (8 and 10).

(b) Remove ring sets (9 and 11).