Operation in Salt Water Areas - TM-5-4310-278-150021

TM 5-4310-278-15

Figure 2-4. Operating the rotary compressor.

c. Humid conditions can cause corrosion and

salt water. After contact with salt water, wash

deterioration of electrical components. Keep

unit with clean, fresh Walter.

electrical components clean and dry.

b. Coat exposed metal with rustproofing

material.

d. Lubricate engine in accordance with TM

5-2805-208-14.

2-18. Operation at High Altitudes

Because of thinner air at higher altitudes, the

2-17. Operation in Salt Water Areas

carburetor may require an adjustment provid-

a. salt water causes corrosive action on me-

ing a leaner mixture. If this condition exists,

tal. Care must be taken to avoid contact with

refer to TM 5-2805-208-14.

2-7