TM 5-4310-354-14
TS5-4310-354-14/4-28
REMOVAL
INSTALLATION
STEP 1.
TAG
EACH
FUEL
LINE
FOR
STEP 1.
USE NEW FUEL PASSAGE SCREW
INSTALLATION REFERENCE. EACH LINE
GASKETS, TWO EACH FUEL LINE.
MUST BE INSTALLED IN THE SAME
INSTALL
FUEL
LINES
TO
FUEL
LOCATION AS REMOVED.
REMOVE
INJECTION PUMP AND ATTACH WITH
LOCKNUT, CAP SCREW, OUTER AND
GASKETS
AND
FUEL
PASSAGE
INNER CLAMP, AND CLAMP INSULATION.
SCREWS.
STEP 2.
LOOSEN FUEL INJECTION LINE NUT AND
STEP 2.
CONNECT EACH FUEL LINE TO ITS
DISCONNECT LINE FROM EACH FUEL
RESPECTIVE FUEL INJECTION NOZZLE
INJECTION NOZZLE.
AND TIGHTEN FUEL LINE NUT.
STEP 3.
REMOVE FUEL PASSAGE SCREWS AND
STEP 3.
INSTALL CLAMP INSULATION, INNER
GASKETS THAT ATTACH FUEL LINES TO
AND OUTER CLAMP TO FUEL LINES 1
FUEL INJECTION PUMP.
DISCARD
AND 2 AND SECURE WITH CAP SCREW
GASKETS. REMOVE FUEL INJECTION
AND LOCK NUT.
IN LIKE MANNER,
LINES.
INSTALL CLAMP ON FUEL LINES 3 AND
4. REMOVE TAGS FROM FUEL LINE.
Figure 4-28. Fuel injection lines, removal and installation.
4-55
