TM 5-4310-354-14
b. Cleaning and Inspection.
(3) Inspect the fuel injection nozzles for
cracks, breaks, or any other damage.
(1) Clean the fuel injection nozzles with clean
Inspect hardware for distortion and
diesel fuel. Dry thoroughly with filtered,
damaged threads.
dry compressed air. Blow air through the
leakoff lines to ensure that they are clear
c. Installation. Install the fuel injection nozzles as
and unobstructed.
shown in figure 4-26.
(2) Inspect the fuel lines for cracks, dents,
4-43. Fuel Transfer Pump.
kinks, loose or damaged ferrules, and
damaged threads. Damaged lines are to
a. Removal. Remove the fuel transfer pump as
be replaced.
shown in figure 4-27.
REMOVAL
STEP 1.
DISCONNECT FUEL PICK-UP HOSE
ASSEMBLY.
DISCONNECT TRANSFER
PUMP OUTLET FUEL LINE. BE CAREFUL
NOT TO LOOSE EYELET FROM OUTLET
FUEL LINE.
STEP 2.
REMOVE CAP SCREWS AND LOCK
WASHERS THAT SECURE TRANSFER
PUMP TO CYLINDER BLOCK.
STEP 3.
REMOVE THE TRANSFER PUMP AND
GASKET. DISCARD GASKET.
INSTALLATION
STEP 1.
INSTALL A NEW GASKET AND THE FUEL
TRANSFER PUMP IN POSITION ON
CYLINDER BLOCK.
STEP 2.
SECURE TRANSFER PUMP WITH LOCK
WASHERS AND CAP SCREWS.
STEP 3.
CONNECT THE PUMP OUTLET FUEL
TS5-4310-354-14/4-27
LINE
AND
FUEL
PICK-UP
HOSE
ASSEMBLY. REFER TO FIG 3-17 AND
PURGE AIR FROM SYSTEM.
Figure 4-27. Fuel transfer pump, removal and installation.
4-53
