TM 5-4310-354-14
CHAPTER 5
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
5-1. Tools and Equipment. Tools and equipment
Support Maintenance are listed in Repair Parts and
usually listed in the Basic Issue Items List and Items
Special Tools List manual, TM 5-4310-354-24P.
Troop Installed or Authorized List do not apply to this
equipment.
5-3. Maintenance Repair Parts. Repair parts and
equipment are listed and illustrated in the Repair Parts
5-2. Special Tools and Equipment. Special tools and
and Special Tools List manual, TM 54310-354-24P.
equipment required for Direct Support and General
Section II. TROUBLESHOOTING
5-4. General. This section provides information useful
component, unit, or system is followed by a list of tests
in diagnosing and correcting unsatisfactory operation or
or inspections which will help you to determine probable
failure of the air compressor unit within the scope of
causes and corrective actions to take. You should
Direct Support and General Support Maintenance. The
perform the tests/inspections and corrective actions in
malfunctions that may occur are listed in table 5-1. For
the order listed.
troubleshooting within the scope of Operator/Crew, refer
to table 3-2 and within the scope of Organizational
b. This manual cannot list all malfunctions that may
Maintenance refer to table 4-2. Maintenance functions
occur, nor all tests or inspections and corrective actions.
within the scope of each maintenance level are indicated
If a malfunction is not listed or is not corrected by listed
in the Maintenance Allocation Chart, Appendix C.
corrective actions, notify your supervisor.
5-5.
Troubleshooting.
NOTE
a. This
section
contains
troubleshooting
Before you use this table, be sure
information for locating and correcting most of the
you have performed all applicable
operating troubles which may develop in the air
operating checks.
compressor unit. Each malfunction for an individual
5-1
